Ultimate Guide to the HPE6-A72 - Latest Dec 16, 2024 Edition Available Now
2024 Updated Verified Pass HPE6-A72 Exam - Real Questions and Answers
HPE6-A72 certification exam covers a wide range of topics related to Aruba switching solutions, including ArubaOS switch configuration, VLANs and trunking, link aggregation, spanning tree, and multicast. HPE6-A72 exam also covers basic networking concepts such as IP addressing, subnetting, and routing. Candidates are expected to have a good understanding of these topics before taking the exam.
NEW QUESTION # 59
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION # 60
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1# no ssh server vrf default
Core-1# no https-server vrf default - B. Core-1(config)# no ssh server
Core-1(config)# no https-server - C. Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable - D. Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default
Answer: D
NEW QUESTION # 61
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 switchport
- B. show interface port 1/1/10 trunk
- C. show vlan port 1/1/10
- D. show trunk port 1/1/10 extended
Answer: D
NEW QUESTION # 62
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 1/7/16
- B. 8400(config)# interface 2/4/15
- C. 8400(config)# interface 1/4/15
- D. 8400(config)# interface 2/3/17
Answer: B
NEW QUESTION # 63
What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)
- A. multiple frame copies leading to instability of the MAC address table
- B. broadcast storms
- C. costs associated with upgrading from copper to fiber
- D. security issues with a redundant loop indicating to hackers that a back-door exists
- E. routing loops
Answer: A,D
NEW QUESTION # 64
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1101 1000
- B. 1110 1101
- C. 1001 1111 0101 0011
- D. 1000 1101 1110 1101
Answer: B
NEW QUESTION # 65
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?
- A. show interface vlan 1111
- B. show vlan 1111
- C. show interface 1/1/1
- D. show interface gigabit 1/1/1
Answer: C
NEW QUESTION # 66
Which two options are considered Layer 2 protocols? (Select two.)
- A. 802.11af
- B. 802.1Q
- C. IPSec
- D. RIP
- E. STP
Answer: B,E
NEW QUESTION # 67
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION # 68
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 69
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181 - B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181 - C. Host-B: assign the default-gateway address 10.1.20.181
- D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.1
Answer: B
NEW QUESTION # 70
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command more
- B. The command terminal length 30
- C. The command page
- D. The command less
Answer: C
NEW QUESTION # 71
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 72
Which two options are the Layer 2 protocols? (Choose two.)
- A. 802.11af
- B. 802.1Q
- C. IPSec
- D. RIP
- E. STP
Answer: B,E
NEW QUESTION # 73
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 74
Refer to the exhibit.
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.
What is the correct command to ping Server-1 from Access-2 to test reachability?
- A. Access-2# ping 172.16.1.97 vrf mgmt
- B. Access-2# ping 172.16.1.97
- C. Access-2# ping 172.16.1.97 vrf default
- D. Access-2# ping6 172.16.1.97 vrf mgmt.
Answer: A
NEW QUESTION # 75
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- B. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- C. The VSF feature is not compatible between AOS-CX and AOS platforms.
- D. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
- E. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
Answer: D,E
NEW QUESTION # 76
......
Dumps Moneyack Guarantee - HPE6-A72 Dumps Approved Dumps: https://selftestengine.testkingit.com/HP/latest-HPE6-A72-exam-dumps.html